Enermax E651-EPS 550W FMA Power Supply
|
|
|
High efficiency is achieve by using using high quality
components and the skills of our designer to maximizes your
power supply output and minimize wasted power. Efficiency is
the measure of how much of the 100% power going in to the
PSU is being used up and the unused power dissipate into
heat through the heatsink. Lower efficiency means that more
power is being wasted and also the PSU will generate more
heat. .
|
|
|
|
|
Effectively prevents electro-magnetic pulse leaking from
switching power supply to appliances that are being attached
to the same power source, i.e. AC wall plug..
|
|
|
|
|
Enermax has one of the highest protection standard on the
market today, due to our advance design we offer the
following type of protections:
OCP -Over Current Protection, UCP -Under Current Protection,
OVP - Over Voltage Protection, OLP -Over Load Protection,
OTP - Over Temperature Protection, SCP - Short Circuits
Protection.
|
|
|
|
|
Connect your system to the faster S-ATA interface for better
performance.
|
|
|
|
|
Acoustic noise is successfully reduced with two fans giving
more airflow in less rpm and smooth mechanical design of fan
guards.
|
|
|
|
|
The best cooling method for PC system, and is strongly
suggested by AMD.
|
|
|
|
| RPM signal of 8cm exhaust fan is provided. |
|
Type: ATX
Maximum Power: 550W
PFC: No
Power Good Signal: 100-500ms
Hold-up Time: 17ms min.
Efficiency: 70% min.
Over Voltage Protection: +5V 5.6-6.9V; +3.3V 3.7-4.5V; +5VSB
5.6-6.9V
Overload Protection: 105%~140%
Input Voltage: 90V~135V AC or 180V~265V AC
Input Frequency Range: 47Hz-63Hz
Input Current: 13A/ 8A
Output: +3.3V@36A; +5V@36A; -5V@1A; +12V@36A; -12V@1A; +5VSB@2.2A
MTBF: 100K hours at 25șC
Approvals: UL, cUL,TUV, DEMKO, NEMKO, SEMKO, FI |
|
| Detailed Specs
|
EG651P-VE FM 24P
|
| I/P |
Voltage rating |
90V~135V AC or 180V~265V AC
(selected by slide switch)
|
| Iin=115/230Vac |
13A / 8A
|
| Frequency |
47Hz~63Hz
|
| Inrush current |
60A max./230V (at cold start)
|
| O/P |
DC
Voltage |
Ripple & Noise |
Total
Reg. |
Output current rating
Min. / Max.
|
| +3.3V |
50mV |
±4% |
0.3A / 36A
|
| +5V |
50mV |
±5% |
0.3A / 36A
|
| +12V |
120mV |
±5% |
1.5A / 36A
|
| -5V |
50mV |
±10% |
0A / 1A
|
| -12V |
120mV |
±10% |
0A / 1A
|
| +5Vsb |
50mV |
±5% |
0.1A / 2.2A
|
| +3.3V & +5V |
200W
|
| TOTAL O/P |
550W
|
| Hold up time |
17ms min. at 230V AC full load |
| Over Power Protection |
105%~140% of max load |
| Over Voltage Protection |
+5V: 5.6V~6.9V
+3.3V: 3.7V~4.5V
+5Vsb: 5.6V~6.9V |
| Efficiency |
70% min. at full load |
| Cooling |
Air convection by +12V DC fan |
| Operation Temperature |
0șC ~25șC for full rating of
load,
decrease to zero Watts O/P at 70șC |
| Storage Temperature |
-20șC ~80șC |
| Humidity |
Operating: to 85% relative
humidity ,
non-condensing At 25șC
Storage : to 95% relative humidity ,
non-condensing At 50șC |
| MTBF |
100K hours at 25șC, 70% full
rated load |
| EMC |
EN55022, Class B
FCC Class B
IEC 801-2, 3, 4, 5, 6, 8, 11 |
| Safety |
|
| Dimension |
W150 x H86 x D140 (mm) |
|
|
 |
 |
 |
 |
 |
| 20+4 Main power |
EPS +12V |
Serial ATA |
FDD Power |
HDD Power |
 |
|
|
|
|
| Fan RPM Monitor |
|
|
|
|
|
20+4 Pins Main Power: 1 (support 24p and 20p MB)
EPS +12V: 1
Serial ATA : 4
HDD Power :7
FDD Power : 2
Fan Monitor: 1 |