eMachine Mini Micro ATX Power Supply 200watt w/ Ball Bearing Fan
eMachine Mini Micro ATX Power Supply 200watt w/ Ball Bearing Fan
eMachine Mini Micro ATX Power Supply 200watt w/ Ball Bearing Fan
Model: PS-E200B
45.99
Free Power Supply Test before shipping: 
    
Add External Power Cord: 
    
Add Internal Power Y-Spliter Plug: 
    
Warranty Option: 
    



Specifications
eMachine Mini Micro ATX Power Supply 200watt w/ Ball Bearing Fan

This 200watt Replacement Power Supply has a longer lasting Ball Bearing
Fan to suck Air from the CPU and dump the Hot Air to the outside of the
case. It also operates as a Smart Thermo Fan and could run a little bit quieter.
Technically, this 200w Replacement unit is compliant with Intel P4 SFX12V
Power Design Guide 2.0.  However, most importantly to you, we complied
the following list for your Compatibility Cross Reference:

Compatible with following eMachine eTower & eMonster System Models:

266, 300, 300C, 300K, 333C, 333CS, 333K, 333I, 333ID, 366I, 366ID, 366C, 366IS, 366I2, 400I2, 400ID, 400IDX, 400IX, 400I, 400I3, 433I, 466I, 466ID, 466IS, 466IX, 500I, 500ID, 500IDX, 500IS, 500IX, 533ID, 533IR, 533I, 533ID2, 566I, 566I2, 566IRX, 566IR

Works with eMonster 500, 500A, 550, 550R, 600, 700, 800
Or also works with eTower T1090, T1096, T1100, T1110, T1115, T1116, T1120, T1125, T1400, T1801, T1855, T1901, T1930, T3100, T4130, T4150, T4155, T4160, T4165, T4200.

*eMachine, eTower, & eMonster are the register trademarks of eMachine systems


  • PS Installation Support Offered with every order
  • Same day shipping on this PS orders by 12pm PST every weekday
  • ATX 2.03 Standard
  • Switchable AC 115/230V input
  • Dimension: 5" Wide x 4" Deep x 3" Tall
  • *3"Height includes fan at bottom
  • UL, CSA, TUV, CE Approved
  • Over voltage protection and Short circuit protection
  • High efficiency and Low Ripple & Noise
  • MTBF:50K hours and 100% Hi-pot tested

FAQ:

While Ilssan ISP 120S is common Emachine OEM part, your defective
e-Machine Power Supply could also be listed with following part#, name
, or Model#:

P/N SS-200SFD. Fortron/Source FSP180-50NIV, FSP150-50NI, FSP150-50CI,
Ilssan ISP 120S, Bestec ATX-100-5, HIPRO HP-K1507A3C, Delta
DPS-145PB-111, DPS-111AB,
Delta DPS-120AB A, HeroIchi HEC-145FC and others.

A Higher Wattage will not burn your system.  A Higher Wattage output
is more fault tolerant, and allows you to add more device(s) to your system.
To handle more loads, so to speak...  Meanwhile, it will only give you as much
"juice" as your system would ask.  i.e.  If your system devices take up 180watts
of load, then a 200watts power supply would output 180watts and have left
20watts of output  capability in reserve.

At some instances, we also recommend the optional Power Supply "Y"
Splitter Power Plug Cable to help the Power Supply reach certain Hard Disk
installation in some cases.

Once again, this replacement power supply unit is compatible with 266, 300,
300C, 300K, 333C, 333CS, 333K, 333I, 333ID, 366I, 366ID, 366C, 366IS,
366I2, 400I2, 400ID, 400IDX, 400IX, 400I, 400I3, 433I, 466I, 466ID, 466IS,
466IX, 500I, 500ID, 500IDX, 500IS, 500IX, 533ID, 533IR, 533I, 533ID2, 566I,
566I2, 566IRX, 566IR, Also works with eMonster 500, 500A, 550, 550R, 600,
700, 800, eTower T1090, T1096, T1100, T1110, T1115, T1116, T1120, T1125,
T1400, T1801, T1855, T1901, T1930, T3100, T4130, T4150, T4155, T4160,
T4165, T4200.